|Downloads & links|
|CM CANopen brochure|
|Overview Anybus gateways|
|Product info on website|
CANopen Master / Slave module for the SIMATIC® S7-1200 PLC
With the CM CANopen you can connect any CANopen or CAN 2.0A device to your SIMATIC S7-1200 PLC. The module is connected to your S7-1200 and acts as a bridge between the CANopen / CAN devices and the micro-PLC. This allows you to choose from a wider range of automation products when designing your system.
CANopen and CAN 2.0A support for the CM CANopen expansion module for the SIMATIC S7-1200 PLC. Any device that runs the CANopen protocol or a modified CAN 2.0A based protocol can be connected. Once linked to the S7-1200, you set the CM CANopen module from TIA Portal®. Your CANopen network configuration can then be made in the accompanying CM CANopen Configuration Studio.
The CM CANopen module can be configured to be either a Master or Slave from TIA Portal. No separate programming is required to make the configuration.
The CM CANopen module is designed to be connected directly to the SIMATIC S7-1200 PLC. The module exchanges data and signals via the backplane bus, which also supplies the module with power.
Get started quickly with four simple steps!
1 Attach the CM CANopen module to the S7-1200 PLC
2 Download and install the HSP setup file from TIA Portal
3 Configure the S7-1200 PLC for the CM CANopen module from TIA Portal
4 Configure the CANopen network with the supplied CM CANopen Configuration Studio