Anybus M-Bus Modbus-TCP gateway 024380. 20 slaves

The Anybus M-Bus to Modbus TCP gateway decodes M-Bus telegrams. You can have a maximum of 20 or 80 M-Bus participants communicate with a Modbus TCP network.

You can also connect your M-Bus devices on other industrial networks with this gateway. This by using an Anybus X gateway for Modbus-TCP. This allows linking with CANopen, Profibus, Profinet, Ethernet / IP, EtherCat, ModbusRTU or Devicenet, among others.

The easy-to-use gateway creates a connection from Modbus-TCP to the other network. By making data about the electricity, water, gas, etc. consumed directly available in your PLC system, you can achieve a complete overview in a SCADA system, including parameters that otherwise have to be checked separately.

Easy web-based configuration tool. No programming required.

TECHNICAL SPECIFICATIONS

• Dimensions: 89 mm x 35 mm x 58 mm
• Power supply: 24VDC
• Temperature: 0 to 50 ° C
• Current consumption: Max 300mA
• Baud Rate: 300-19200
• Mechanical protection: IP20
• Required software: CHIPtool
• Connectors M-Bus: Screw terminal, max. 2.5mm²
• Ethernet connector: 100MBit, RJ45, shielded
• Casing Material: Plastic
• Mounting: DIN rail (35 • 7.5 / 15)
• Order code: 025070 (80 slaves)
• Order code: 024380 (20 slaves
•  
• There is also an M-bus to RS232 converter, order code 022240-B.