Integrate Modbus RTU devices in a Modbus TCP network with the Intesis Modbus Router INMBSRTR0320000. Up to 5 Modbus TCP clients and 32 Modbus RTU servers.
This gateway allows Modbus TCP/RTU devices to communicate on a BACnet IP & or MS/TP network. Up to 5 Modbus TCP nodes/devices and to 255 Modbus Devices per Node (RTU and TCP). Maximum 100 points
The DALI /DALI2 to KNX gateway allows DALI devices to communicate on KNX network. The gateway works as a translator between the two networks. For 64 DALIdevices.
Integrate OCPP 1.6-based electric vehicle charging stations with any Modbus RTU or TCP controller or connect the chargers to an external OCPP Central System (CS) and monitor them via Modbus.
This DALI / Dali-2 to Modbus gateway allows DALI devices to communicate on a Modbus network. The gateway acts as a translator between the two networks. For up to 64 DALI devices.
This Modbus TCP & RTU server gateway allows Modbus devices to communicate on a Bacnet network. Up to 5 simultaneous Modbus TCP servers and up to 32 Modbus devices per RTU node (without repeater) and up to 255 in total. 100 data points.
Protocol translator for the integration of AC units into building automation systems. Supports Hisense, Hitachi, Midea, Mitsubishi Electric, Panasonic and Samsung.
This gateway allows Modbus TCP/RTU devices to communicate on a BACnet IP & or MS/TP network. Up to 5 Modbus TCP nodes/devices and to 255 Modbus Devices per Node (RTU and TCP). Maximum 3000 points
This gateway allows Modbus TCP/RTU devices to communicate on a BACnet IP & or MS/TP network. Up to 5 Modbus TCP nodes/devices and to 255 Modbus Devices per Node (RTU and TCP). Maximum 250 points
Protocol translator for the integration of AC units into building automation systems. Supports Hisense, Hitachi, Midea, Mitsubishi Electric, Panasonic and Samsung.
This DALI server gateway allows DALI and DALI-2 devices to communicate on a BACnet IP & or MS/TP network. The gateway can handle 1 DALI channel with each 64 drivers/ballast and 16 DALI-2 sensors.
This DALI / Dali-2 to Modbus gateway allows DALI devices to communicate on a Modbus network. The gateway acts as a translator between the two networks. For up to 64 DALI devices.
This gateway allows Modbus TCP & RTU devices to communicate on a KNX TP network. Up to 5 Modbus TCP nodes/devices and to 255 Modbus Devices per node (RTU and TCP). Maximum 100 points
This KNX TP server gateway connects KNX devices to a BACnet IP & MS/TP network. This makes the KNX data available in the BACnet network. Up to 100 nodes.